Comfort  Automation/ Security System Forums Home
Home Search search Menu menu Not logged in - Login | Register

UCM/PI Info
 Moderated by: mattbrain, benstinton
 New Topic   Reply   Printer Friendly 
 Rate Topic 
AuthorPost
 Posted: Thursday Jul 8th, 2021 03:33 pm
   PM  Quote  Reply 
1st Post
MJC Electronics
Member
 

Joined: Friday Aug 29th, 2008
Location:  
Posts: 19
Status: 
Offline

  back to top

Hi all
I've just discovered the massive leaps this project has made since I last looked.
I'm still struggling on with X10 dimmers which have become even more problematic with the switch to LED lamps. My plan was to replace with Velbus but as I have 35+ X10 DIN rail dimmers and a fair few switches this would be quite a project in terms of time and expense plus there is the worry that even then the dimmers may still be problematic with LED loads.It looks like adding a UCM/PI would open the door to many other lighting technologies some of which would have been built from the ground up to support dimming of LED fixtures so I think this might be the right path.
I want to gather as much information as I can so I've read everything on this forum but there's not that much here. I read that most of the forum traffic is on the Slack forum which was originally for beta testers and is now open however I can't find a link to that resource.Could someone point me in the right direction please?



 Current time is 05:35 pm
Top




UltraBB 1.172 Copyright © 2007-2014 Data 1 Systems