| Posted: Thursday Jan 29th, 2009 02:55 am |
|
21st Post |
admin
Administrator
| Joined: | Saturday Mar 3rd, 2007 |
| Location: | Singapore |
| Posts: | 1032 |
| Status: |
Offline
|
back to top
|
We found that there is a bug in UCM firmware which causes s? not to have a reply
This will be fixed in the next UCM firmware
Thanks for the feedback
juwi_uk wrote: Should the s?nn work at the moment?
Is the temp sensor on SCS1 then s?08
If so what response should I expect back as I dont think it does anything right now (but difficult to tell as incoming messages on the bus might be masking it)
Last edited on Thursday Jan 29th, 2009 12:10 pm by admin
|
| Posted: Thursday Jan 29th, 2009 08:48 am |
|
22nd Post |
juwi_uk
Advanced Member
back to top
|
Hi Chiu
Tested out 2.9.11 the other night and Smartfit commands look to be ok now.
Still:
* Problem I reported the other day about sunrise sunset wizard (the Algiers problem).
* Getparametervalue does convert on opening CCL file but that's easy to fix unless you've got loads to do.
* Sensor value can now be toggled in homecontrol but always says "unknown"; presumably the UCM firmware issue you just mentioned.
* In home control and response wizard you select sensor by name but response source window shows as the number which seems different to other response actions which still show the name.
Looking good otherwise though.
J
|
| Posted: Thursday Jan 29th, 2009 09:52 am |
|
23rd Post |
wexfordman
Member
| Joined: | Monday Jan 1st, 2007 |
| Location: | Cork, Ireland |
| Posts: | 125 |
| Status: |
Offline
|
back to top
|
Thanks,
Never checkend the firmware of the cwmo2, which is what i am using, is it possible to upgrade the cwmo2 firmware ?
Regards,
Eamon
|
| Posted: Thursday Jan 29th, 2009 12:06 pm |
|
24th Post |
admin
Administrator
| Joined: | Saturday Mar 3rd, 2007 |
| Location: | Singapore |
| Posts: | 1032 |
| Status: |
Offline
|
back to top
|
The CWM02 firmware should be 5.128. It is possible to upgrade in future but this is the current version
The problem with not being able to transfer the program is with the beta version of Comfigurator, not the CWM, and it will be fixed in the next version so dont worry
|
| Posted: Thursday Jan 29th, 2009 12:25 pm |
|
25th Post |
admin
Administrator
| Joined: | Saturday Mar 3rd, 2007 |
| Location: | Singapore |
| Posts: | 1032 |
| Status: |
Offline
|
back to top
|
Do you mean that the problem with sunrise/sunset still exists?
I believe it has been fixed
You may be opening an old file which was saved with the problem
If you start a new file and save it and open it again, you should find that the city is saved with the file
juwi_uk wrote:
Still:
* Problem I reported the other day about sunrise sunset wizard (the Algiers problem).
|
| Posted: Thursday Jan 29th, 2009 12:43 pm |
|
26th Post |
juwi_uk
Advanced Member
back to top
|
Sorry about that. You are right.
Would be nice to be able to type a custom Country and City etc as in my case I'm putting in my longitude and lattitude manually for my city so would be nice to be able to name it.
These settings arent in an XML file of something are they ie so I can add my setting and name it via this method?
|
| Posted: Thursday Jan 29th, 2009 12:51 pm |
|
27th Post |
admin
Administrator
| Joined: | Saturday Mar 3rd, 2007 |
| Location: | Singapore |
| Posts: | 1032 |
| Status: |
Offline
|
back to top
|
You can do that by editing the cities.csv file in the config folder
|
| Posted: Thursday Jan 29th, 2009 12:55 pm |
|
28th Post |
wexfordman
Member
| Joined: | Monday Jan 1st, 2007 |
| Location: | Cork, Ireland |
| Posts: | 125 |
| Status: |
Offline
|
back to top
|
admin wrote: The CWM02 firmware should be 5.128. It is possible to upgrade in future but this is the current version
The problem with not being able to transfer the program is with the beta version of Comfigurator, not the CWM, and it will be fixed in the next version so dont worry
Thanks again. I just got my comfort II, and am swapping it out from an older comfort I so a bit rusty (early 9 years ago since I put the origional in!!).
Using the existing comfigurator, I dont see options to do the following for eaxample:-
if flag sitting room is set AND security status = day mode,
I think it needs to be done with multiple if statements with the existing comfigurator. Would you recommend I hold off on building a fully functional config file until the beta issue is sorted ?
Regards,
EAMON
|
| Posted: Thursday Jan 29th, 2009 01:34 pm |
|
29th Post |
admin
Administrator
| Joined: | Saturday Mar 3rd, 2007 |
| Location: | Singapore |
| Posts: | 1032 |
| Status: |
Offline
|
back to top
|
If you want to use AND statements it is much much easier with the new version, so it is best that you wait a while
You can start programming though, and you can convert to ccl and download (now called WRITE to Comfort) if you need
|
| Posted: Thursday Jan 29th, 2009 01:46 pm |
|
30th Post |
wexfordman
Member
| Joined: | Monday Jan 1st, 2007 |
| Location: | Cork, Ireland |
| Posts: | 125 |
| Status: |
Offline
|
back to top
|
Thanks again,
So use current release of comfigurator and save as ccl to download, or use beta version, save as ccl and download using current release ?
|
| Posted: Thursday Jan 29th, 2009 01:57 pm |
|
31st Post |
admin
Administrator
| Joined: | Saturday Mar 3rd, 2007 |
| Location: | Singapore |
| Posts: | 1032 |
| Status: |
Offline
|
back to top
|
Sorry for not being clear - I suggest to use beta 2.9.11 to program so you can use the AND statement and if you need to download, convert to ccl and use the current (2.2.3) version
|
| Posted: Thursday Jan 29th, 2009 02:23 pm |
|
32nd Post |
wexfordman
Member
| Joined: | Monday Jan 1st, 2007 |
| Location: | Cork, Ireland |
| Posts: | 125 |
| Status: |
Offline
|
back to top
|
No bother, Its my fault, I need an "idiots guide" 
Thanks,
Eamon
Last edited on Thursday Jan 29th, 2009 02:23 pm by wexfordman
|
| Posted: Saturday Jan 31st, 2009 05:58 pm |
|
33rd Post |
juwi_uk
Advanced Member
back to top
|
Found this whilst playing with my settings on the Control Menu in 2.9.11.
Only seems to do the following if you have Show Status ticked.
(1) Pick one of your entries (mine is a counter) in Control Menu and tick the show status checkbox (and enter user code etc).
(2) Now dropdown any Phrase word list. You'll notice the the phrase word field title highlights in blue.
(3) Now wait. You'll see the phrase word field title highlight change to grey.
(4) Now click on the middle panel and voila, a floating dropdown list that isn't connected to the dropdown arrow anymore. You have to exit Comfigurator to clear it.
If you click on the floating box though you'll get:
Unhandled exception:
System.NullReferenceException: Object reference not set to an instance of an object.
at VisualHint.SmartPropertyGrid.PropInPlaceList.ᜀ(Object A_0, EventArgs A_1)
at VisualHint.SmartPropertyGrid.PropInPlaceContainer.ᜀ(Boolean A_0)
at VisualHint.SmartPropertyGrid.PropInPlaceContainer.ᜀ(Object A_0, MouseEventArgs A_1)
at System.Windows.Forms.Control.OnMouseUp(MouseEventArgs e)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ListBox.WndProc(Message& m)
at VisualHint.SmartPropertyGrid.DropDownContentListBox.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
Had great fun trying to pin this sequence down. With a bit of judicious clicking you can get all 4 phrase word dropdowns floating independently of Comfigurator.
Julian
|
| Posted: Saturday Jan 31st, 2009 08:09 pm |
|
34th Post |
juwi_uk
Advanced Member
back to top
|
Hi
What am I doing wrong here. I created the response below and setup as an hourly response under miscellaneous responses. Trouble is it carries on all night even though when i checked the NightTime flag it seems correctly set when sunset/surise settings kick in. What am I missing?
Julian
(I've cut out more of the same in here as indicated by the dots as otherwise forum message too deep!!)
If NightTime = 0 Then
If SensorRegister OutsideTemp <= 32 Then
Announce Outside Temperature ZERO Degrees
End If
If SensorRegister OutsideTemp > 32 Then
If SensorRegister OutsideTemp <= 35 Then
Announce Outside Temperature 1 Degrees
End If
End If
.
.
.
.
If SensorRegister OutsideTemp > 84 Then
If SensorRegister OutsideTemp < 86 Then
Announce Outside Temperature 20 9 Degrees
End If
End If
If SensorRegister OutsideTemp = 86 Then
Announce Outside Temperature 30 Degrees
End If
End If
Get SensorRegister 8
Set LastOutsideTempF
Last edited on Saturday Jan 31st, 2009 08:14 pm by juwi_uk
|
| Posted: Saturday Jan 31st, 2009 10:19 pm |
|
35th Post |
juwi_uk
Advanced Member
back to top
|
You might want to move this to the Comfigurator thread as I accidentally created this in the wrong place.
|
| Posted: Sunday Feb 1st, 2009 02:16 am |
|
36th Post |
admin
Administrator
| Joined: | Saturday Mar 3rd, 2007 |
| Location: | Singapore |
| Posts: | 1032 |
| Status: |
Offline
|
back to top
|
The Night Time Flag is set when the time reaches sunset
If you change the time from before to after sunset, it will not set
Could this be what you did?
|
| Posted: Sunday Feb 1st, 2009 08:31 am |
|
37th Post |
juwi_uk
Advanced Member
back to top
|
Hi,
No I dont believe I've chamged the time, the otnly thing I normally do is set to PC time when uploading but this is not the problem I think.
Changes to hours instead as below and it's still doing it:
If Hours < 22 Then
If Hours > 6 Then
If SensorRegister OutsideTemp <= 32 Then
Announce Outside Temperature ZERO Degrees
End If
If SensorRegister OutsideTemp > 32 Then
If SensorRegister OutsideTemp <= 35 Then
Announce Outside Temperature 1 Degrees
End If
End If
.
.
.
If SensorRegister OutsideTemp > 84 Then
If SensorRegister OutsideTemp < 86 Then
Announce Outside Temperature 20 9 Degrees
End If
End If
If SensorRegister OutsideTemp = 86 Then
Announce Outside Temperature 30 Degrees
End If
End If
End If
Get SensorRegister 8
Set LastOutsideTempF
|
| Posted: Sunday Feb 1st, 2009 08:48 am |
|
38th Post |
admin
Administrator
| Joined: | Saturday Mar 3rd, 2007 |
| Location: | Singapore |
| Posts: | 1032 |
| Status: |
Offline
|
back to top
|
Do you mean that if the time is after 10 PM or before 6 AM, the announcement still occurs on the hourly response?
|
| Posted: Sunday Feb 1st, 2009 08:53 am |
|
39th Post |
juwi_uk
Advanced Member
back to top
|
No,
The opposite, I only want the announcement from 7am to 9 pm on an hourly response. Surely that's what I've setup with the IF statements.
Oh but just to add to this you'll see i set the counter still outside of the main IF staements so this will still be done every hour. Wonder if this is breaking your conditional statements?
J
Last edited on Sunday Feb 1st, 2009 08:56 am by juwi_uk
|
| Posted: Sunday Feb 1st, 2009 09:54 am |
|
40th Post |
admin
Administrator
| Joined: | Saturday Mar 3rd, 2007 |
| Location: | Singapore |
| Posts: | 1032 |
| Status: |
Offline
|
back to top
|
Congratulations, You have found a bug in the creation of the action code because of the length of the branch if not Night. The code is asked to branch over too many actions
The workaround is to reduce the branch by breaking up the code into several If Not Night ie
If NightTime = 0 Then
If SensorRegister OutsideTemp <= 32 Then
Announce Outside Temperature ZERO Degrees
End If
If SensorRegister OutsideTemp > 32 Then
If SensorRegister OutsideTemp <= 35 Then
Announce Outside Temperature 1 Degrees
End If
End If
....
...
If NightTime = 0 Then
If SensorRegister OutsideTemp = 41 Then
Announce Outside Temperature 5 Degrees
End If
If SensorRegister OutsideTemp > 41 Then
If SensorRegister OutsideTemp <= 44 Then
Announce Outside Temperature 6 Degrees
End If
End If
..
..
If SensorRegister OutsideTemp >= 52 Then
If SensorRegister OutsideTemp <= 54 Then
Announce Outside Temperature 12 Degrees
End If
End If
End If
If NightTime = 0 Then
If SensorRegister OutsideTemp > 75 Then
If SensorRegister OutsideTemp < 77 Then
Announce Outside Temperature 20 4 Degrees
End If
End If
..
If SensorRegister OutsideTemp > 80 Then
If SensorRegister OutsideTemp <= 82 Then
Announce Outside Temperature 20 7 Degrees
End If
End If
End If
If NightTime = 0 Then
If SensorRegister OutsideTemp > 82 Then
If SensorRegister OutsideTemp <= 84 Then
Announce Outside Temperature 20 8 Degrees
End If
End If
If SensorRegister OutsideTemp > 84 Then
If SensorRegister OutsideTemp < 86 Then
Announce Outside Temperature 20 9 Degrees
End If
End If
If SensorRegister OutsideTemp = 86 Then
Announce Outside Temperature 30 Degrees
End If
End If
Get SensorRegister 8
Last edited on Monday Feb 2nd, 2009 06:10 am by admin
|
| Current time is 01:50 pm | Page:   1 2 3   |
|
