+- Comfort Automation/ Security System Forums (https://www.comfortforums.com)
+-- Forum: Support (https://www.comfortforums.com/forum-2.html)
+--- Forum: Problems & Troubleshooting (https://www.comfortforums.com/forum-36.html)
+--- Thread: example about using comfort (/thread-3954.html)
Pages:
1
2
- hasan hadi - 08-30-2014
[user=86]ident[/user] wrote:
Quote:The UCM, SEM, Door station, Keypad and RIO/SCS have their own ID addresssSir you mean if connected 8 UCM and 15 RIO and 5 SEM to main board across RS485 then all board have ID but all board have Limited ID because only using sw to adjust ID nowthen (8UCM+15RIO +5 SEM=28 ID please can be give me wring to connected complete system .
Do UCM ID 1 is not the same as Keypad ID1, or SEM ID1 or door station ID 1 etc
UCM ID is 1 to 8, Keypad ID is 1 to 15. They are separate Ids
thank you for all support and good information
- ident - 08-31-2014
The system can have 15 keypads, 15 SCS/RIO, 5 SEM, 3 Dooor stations, 8 UCMs
each with their own id
Each device eg has their own ID
If you follow the instructions on seting the ID of each device you will not have any problem
as I sais the ID for each type of module is separate from other modules
- hasan hadi - 08-31-2014
[user=86]ident[/user] wrote:
Quote:The system can have 15 keypads, 15 SCS/RIO, 5 SEM, 3 Dooor stations, 8 UCMsHi,
each with their own id
Each device eg has their own ID
If you follow the instructions on seting the ID of each device you will not have any problem
as I sais the ID for each type of module is separate from other modules
now clear for Id
now i need wring for complete system include (([highlight= rgb(254, 251, 232);]15 keypads, 15 SCS/RIO, 5 SEM, 3 Door stations, 8 UCMs)) [/highlight]
Regards
- ident - 08-31-2014
Please download
Hookup diagram
https://www.cytech.biz/hookup_diagram.html?category_id=106
Comfort wiring guide
https://www.cytech.biz/comfort_wiring_guide.html?category_id=99