+- Comfort Automation/ Security System Forums (https://www.comfortforums.com)
+-- Forum: Products (https://www.comfortforums.com/forum-3.html)
+--- Forum: Scene Control Switches (OBSOLETE) (https://www.comfortforums.com/forum-57.html)
+--- Thread: Temp in celsius (/thread-1538.html)
- TheMax74 - 07-09-2009
Hi, as i can read from the user\'s manual, the SCS gives the output temp in ðF but later, it says
\"In the Home Control Menu, sensor registers may be used as a feedback. To
do so, the feedback type must be set to type 7 (which is sensor register)
and the feedback value set to the register number. (...)
The temperature may also be announced in either ðF or ðC. The default
setting is in ðC.\"
In a response, the temperature is reported in ðF (as indicated in the user\'s manual).
Can i have the temperature reported in ðC in responses?
Thanks
- admin - 07-09-2009
This conversion will be available in the next firmware release. Beta firmware Ultra 5.166 is available from
https://www.cytech.biz/Default.aspx?cmd=sQ0OYE9X66w%2b0P%2bAcFsmAI3j73Rwtfrj&fileid=215&dcid=1&pageindex=
There is a new action to announce temperature in degrees C
This does not include the changing of the units in sensor registers but that will be available soon
- TheMax74 - 07-09-2009
Great, thks
- cc_uk - 04-06-2014
Is there now an option to have the temperature values in the SCS in Celsius? I\'d be keen to worth throughout in Celsius if possible
- ident - 04-07-2014
No, the value is saved in Fahrenheit still