+- Comfort Automation/ Security System Forums (https://www.comfortforums.com)
+-- Forum: Support (https://www.comfortforums.com/forum-2.html)
+--- Forum: Questions on Programming Comfort (https://www.comfortforums.com/forum-83.html)
+--- Thread: How to Play a Voice Message on Keypads or Door station (/thread-1990.html)
- slychiu - 09-14-2010
You can use the Say Words action in Response Wizard to get the keypad to announce a series of words from the wordlist. This is useful for example when you use a RC01 remote control to control something in Comfort. It lets you hear eg \"Bedroom Lights On\" . Select Keypad > Announce words action in Response wizard as in the screenshot below. You can select up to 6 words from the wordlist.
Alternately you can use the action Play Reminder Message on Keypad or Door station.
Select Keypad > Reminder Message on Keypad, Door station or UCM
This plays a selected Reminder Message on any keypad or door station or all devices. You have to record a reminder message on the phone or keypad. This can be used when an external motion detector detects motion, causing a warning message to play on a keypad or door station, or using instead of Say words when the words you want are not in the wordlist