+- Comfort Automation/ Security System Forums (https://www.comfortforums.com)
+-- Forum: Support (https://www.comfortforums.com/forum-2.html)
+--- Forum: Firmware History (https://www.comfortforums.com/forum-60.html)
+--- Thread: REMOTE FIRMWARE UPGRADES (/thread-2418.html)
- Home - 08-15-2011
Would it be possible in the future (one step at a time i think !) to upgrade the \'system\' remotely !
- slychiu - 08-15-2011
It is already possible to upgrade the system remotely via UCM/Ethernet and router configuration for port forwarding
You can upgrade the UCM/Ethernet by direct connection to PC or other modules by Comfort Bus
- Home - 08-15-2011
And pp2 !!!!
I would have thought that the whole point of the upgrade exercise was to eventually get to the point where you could upgrade the comfort system (in its entirety) remotely.
- slychiu - 08-15-2011
PP2 is not needed as mentioned in the tutorial posts
I did say it would be possible to upgrade everything remotely from the Internet
- ekarak - 03-23-2012
It should be noted however that opening up ports on the Internet is asking for trouble. All \"sensitive\" applications like the Comfort IP interface should be inside a seperate VLAN, accessible only via VPN. I\'m using this router for this purpose: Mikrotik RouterBoard RB750