+- Comfort Automation/ Security System Forums (https://www.comfortforums.com)
+-- Forum: Third Party (interfacing to Comfort) (https://www.comfortforums.com/forum-5.html)
+--- Forum: Universal UCM (https://www.comfortforums.com/forum-94.html)
+--- Thread: Response does not always seem to activate UCM Universal / RAKO (/thread-2560.html)
Pages:
1
2
- schford - 11-02-2011
I seem to be having a few niggles with things - sometimes responces do what they should and sometimes they dont its always the ones involving RAKO -
I thought I was imagining things but I got home tonight and my outside spots were not turned on.
I have a responce call sunset - which gets activated at sunset
and that switched on my outside spots.I thought thats wierd and manually activated the response - the lights didnt go on....
I then did it again like 2 seconds later and they did??
I happened to have the monitoring window open and this was the output....I cant see any difference?
This my sound silly but I dont suppose the RAKO unit goes to sleep or anything does it?
******
OK
> RS
< OK
> LI
< LU00
> LI****
< LU01
> UL000003
< DL00000305FF22D7
> V?
< V?FE060522200100
> v?
< v?05FF20010203FFFF
> U?
< U?0A060811
> LI
< LU00
> LI****
< LU01
> DA4A27FF
< RA00
> LI
< LU00
> LI****
< LU01
> DA4A27FF
< RA00
> LI
< LU00
- schford - 11-02-2011
Just had another funny - walking into the kitchen when the PIR detects movement it is supposed to switch scene 1 on.
Scene 1 activates 3 zones - what actually happened was that only one zone got switched on....
Its really wierd!!
- schford - 11-02-2011
I decided to manually run the response to switch the lights off and then back on from my pc when comfigurator threw up the message - the response in this configuraiton might not have been written to comfort etc...
When nothing has changed!!!??
- schford - 11-02-2011
ignoring the error then it wont switch the lights off.
- schford - 11-02-2011
ran it again and it has now switched the lights off - this is creepy!!! Glad Halloween is over!
- schford - 11-02-2011
Walked back into the kitchen - not changed any code at all and now scene 1 activated correctly with all 3 zones switched on....
- HeFeng - 11-03-2011
Hi, schford, this problem seems relative to the response you created, I notice you use timer 0 in your response, sometimes time o is used by other parts of system,can you use other timer? if the problem still exist , can you send your latest cclx file to us so we can simulate your case and try to find the problem.
- schford - 11-03-2011
Hi,
No it doesnt use Timer 0 in the kitchen responce it uses timer 5. Ill email the cclx..
Cheers
Stuart
- schford - 11-03-2011
AN update - home from work tonight and outside spots wer eon which is good - but kitchen is back to only switching on one zone instead of the 3 in scene 1!?
Stuart
- ident - 11-05-2011
Let us know if the solution sent by email by hefeng works