+- Comfort Automation/ Security System Forums (https://www.comfortforums.com)
+-- Forum: Third Party (interfacing to Comfort) (https://www.comfortforums.com/forum-5.html)
+--- Forum: Universal UCM (https://www.comfortforums.com/forum-94.html)
+--- Thread: Rako Interface using Universal UCM (/thread-2940.html)
- ident - 07-05-2012
An application note and cclx file showing how Rako Controls can be interfaced to Comfort using the Universal UCM is available from
https://www.cytech.biz/rako_interface_application_note.html?category_id=124
The RAV232 Interface from Rako is connected to the universal UCM + RS232M submodule via a straight RS232 male to female DE9s
This is a good example of how the Universal UCM can be configured to interface to 3rd party systems. The cclx file has the sample program described in the application note
- schford - 07-06-2012
Hi Ident - my system is live with the 2 way - what do you need?
It works rather well, I use various RAKO keypas to be able to open the drive gates via comfort - and also a combination of key presses in the hall and master bedroom to arm the system at night. I also have the Rako Switches set a counter for light levels etc.
Stuart
- ident - 07-07-2012
Perhaps a sample cclx file for two way that is proven to work? We can use that in the application note for two way control
- ident - 08-09-2012
The Application Note for Rako RAV232Plus bidirectional Interface and a sample cclx file can be downloaded from https://www.cytech.biz/rako_interface_application_note.html?category_id=124
The screenshot shows how the Rako Commmands are saved in the Universal template in Commands to Device so these commands can be sent to Rako using Responses
