+- Comfort Automation/ Security System Forums (https://www.comfortforums.com)
+-- Forum: Products (https://www.comfortforums.com/forum-3.html)
+--- Forum: GSM Module (https://www.comfortforums.com/forum-48.html)
+---- Forum: UCM/GSM Firmware (https://www.comfortforums.com/forum-98.html)
+---- Thread: UCM/GSM4 7.034 (/thread-3635.html)
- ident - 12-05-2013
Known Bugs
- Phone numbers with 7 digits will get the wrong reply when sending SMS to the UCM/GSM4. The UCM/GSM4 will always send the Help Text (1) and (4). This occurs if 7 digits appear in caller ID. Note that this may or may not include the country code, depending on the carrier. This problem has been reported in South Africa and Cyprus. Please upgrade to GSM 7.048
- Fixed \'H\' shunt showing wrong signal strength on LEDs.
- Fixed in event of communication failure/restore, UCM/GSM only dialedto first number twice but Second number is not dialled.
- Improvement on Comfigurator Status reporting to UCM
- Implement prevention for storing more than 160 characters in create text message command.
- Add new status to inform when send sms queue is full.
- Implemented SMS operations in PDU mode to support foreign language text messages. This is \"Non English\" check box. However the max text characters for non-english mode is halved as 2 bytes are needed for each letter
- Implemented multiple concatenated sms.
- ident - 12-07-2013
The multi-Language capability of the new GSM fiirmware 7.034 is shown in the example below
40 is English.
41 is Traditional Chinese.
42 is Thai.
43 is Arabic.
44 is Greek.
45 is Vietnamese.
46 is Tamil.
47 is Esperanto.
- ident - 12-12-2013
UCM/GSM4 has been released