+- Comfort Automation/ Security System Forums (https://www.comfortforums.com)
+-- Forum: Third Party (interfacing to Comfort) (https://www.comfortforums.com/forum-5.html)
+--- Forum: Remote Controls (https://www.comfortforums.com/forum-50.html)
+--- Thread: Daikin ARC452A3 (/thread-3754.html)
- cc_uk - 04-05-2014
I need to get IR codes for a Daikin ARC452A3.
I can try to \'learn\' them via a UCM but when I click encode a large error box appears
Is there a guide to using the Infrared Utility?
- ident - 04-05-2014
The UCM Manual Section 5 explains how to do IR Learning
Download from https://www.cytech.biz/ucm_manual.html
Position the remote control 5 to 10 cm away from the UCM and not place too close
The BUSY1 LED should be on when it is ready to learn
When the IR signal is received the BUSY2 Red led will blink
You should see the IR signal displayed in the screen
- ident - 04-07-2014
If you have any problem with the signal, press the \"save to file\" button, then send the file to support@cytech.biz
- cc_uk - 04-08-2014
Perfect thank you very much. that is working just fine for me now