+- Comfort Automation/ Security System Forums (https://www.comfortforums.com)
+-- Forum: Products (https://www.comfortforums.com/forum-3.html)
+--- Forum: GSM Module (https://www.comfortforums.com/forum-48.html)
+---- Forum: UCM/GSM Firmware (https://www.comfortforums.com/forum-98.html)
+---- Thread: UCM/GSM 7.048 (/thread-3803.html)
- ident - 05-10-2014
Known Bugs
- The reply to an SMS command to Control Key 5 gives the wrong text. It shows the text for control key 1 instead. However note that the sms operation works, only the reply is not correct
- Phone numbers with 7 digits will get the wrong reply when sending SMS to the UCM/GSM4. The UCM/GSM4 will always send the Help Text (1) and (4). This occurs if 7 digits appear in caller ID. Note that this may or may not include the country code, depending on the carrier. This problem has been reported in South Africa and Cyprus. Please upgrade to GSM4 v 7.048
- ident - 07-23-2014
Please note that a bug was found in GSM4 7.048 firmware
- The reply to an SMS command to Control Key 5 gives the wrong text. It shows the text for control key 1 instead. However note that the sms operation works, only the reply is not correct
This shall be fixed in the next firmware release
- ident - 07-24-2014
The bug in GSM4v7.048 has been fixed in firmware 7.053 (Beta)
Those who are affected by the bug please download the firmware from https://www.cytech.biz/product_details.php?item_id=227 and upgrade the GSM4 firmware, and let us know if there are any problems