+- Comfort Automation/ Security System Forums (https://www.comfortforums.com)
+-- Forum: Support (https://www.comfortforums.com/forum-2.html)
+--- Forum: Problems & Troubleshooting (https://www.comfortforums.com/forum-36.html)
+--- Thread: Speaker very Loud & how to stop arming beeps when in Nighttime (/thread-414.html)
- Homedianet - 01-08-2007
I have tried to adjust the volume on the Comfort Gen 2 however the 8 Ohm speaker is still very loud, also whem arming in night time how do i disable the arming sound altogether on the speaker (the keypad can just be turned down).
I have changed the sound type to Alternate beeps what tone frequency and duration do i need for the tones to ensure the sound is minimal (ie not heard) in sound types.
Many thanks
- slychiu - 01-08-2007
Each Siren Type has a checkbox \"High Level\" (see picture). Uncheck this box for the Siren Trimmer (near the siren terminals) to have an effect in reducing the volume of the speaker during that siren type.
if the box is checked the trimmer will have no effect for that siren type
Make sure that High Level is checked for Iintruder, Fire, Tamper and other \"important\" siren types
The speaker siren cannot be disabled, but the volume can be reduced (to nothing) for the siren type if the High level box is unchecked