+- Comfort Automation/ Security System Forums (https://www.comfortforums.com)
+-- Forum: Products (https://www.comfortforums.com/forum-3.html)
+--- Forum: Relay/Automation Modules (https://www.comfortforums.com/forum-118.html)
+--- Thread: Physical Installations of RLY01 (/thread-4143.html)
- dellboy13 - 03-01-2015
Hi,
Does anybody have any pictures of the way they physical installed a RLY01, the relays need to be feed by a MCB, so if you use a common MCB to feed all 4 channels the output will need to also be fused to stop the overload on each relay or you used 4 independent MCB, one for each channel, then you do not need to fuse the outputs. Either way, I would need to build a custom enclosure for the board, so looking for some ideas.
Cheers
Mark