+- Comfort Automation/ Security System Forums (https://www.comfortforums.com)
+-- Forum: Software Applications (https://www.comfortforums.com/forum-4.html)
+--- Forum: Comfigurator (https://www.comfortforums.com/forum-20.html)
+---- Forum: Comfigurator 3.x Old Versions (Archive) (https://www.comfortforums.com/forum-87.html)
+---- Thread: Comfigurator 3.10.1 to 3.10.2 (Beta) (/thread-4162.html)
- slychiu - 03-25-2015
Known Bugs
- For Heatmiser, read from EEPROM is blank but learning works. May be a problem from Comfiguraut 3.7.6
- in KT03, selecting a few buttons and changing some visual attribute may result in exception. But when the exception is cleared, the attribute is changed correctly
- KP06 Screen shows \"Read from Keypad\" and \"write to keypad\" which should not appear. Ignore these buttons
- From Comfigurator 3.9.5. Read from Comfort will cause Functions > Thermostats to fill up the unused Thermostats with sensor 0 and assign Heating and Cooling Outputs to Output 1. You will not be able to control Output 1 after reading from Comfort. In order to free up Output 1, unasssign the outputs from each Thermostat
Bugs Fixed
- For UCM/Zwave, the Virtual Node Info button was missing
- KT03 Button programmed to activate Response did not work - it sent Keypad key command instead
- juwi_uk - 03-25-2015
Notice (maybe I missed in earlier releases) some new settings for the KP06.
When I click \"Read from Keypad\" I get...
- slychiu - 03-26-2015
That is an error. KP06 should not have a Read button
This was mixed up with another product.
- slychiu - 04-12-2015
Comfigurator 3.10.2 (Beta) can be downloaded
The changes are
Bugs Fixed
- If KP06 Screen shows \"Read from Keypad\" and \"write to keypad\", this may happen if the cclx file was created using an older version. Rescan the keypads to remove these buttons
- Fixed bug From Comfigurator 3.9.5. Read from Comfort will cause Functions > Thermostats to fill up the unused Thermostats with sensor 0 and assign Heating and Cooling Outputs to Output 1. You will not be able to control Output 0 after reading from Comfort. In order to free up Output 0, unassign the outputs from each Thermostat
- For Heatmiser, read from EEPROM to Heatmiser modules is blank but learning works. May be a problem from Comfiguraut 3.7.6. Workaround is to use Learn instead of Read from EEPROM
- in KT03, selecting a few buttons and changing some visual attribute may result in exception. But when the exception is cleared, the attribute is changed correctly
- juwi_uk - 04-12-2015
[user=1]slychiu[/user] wrote:
Quote:...Rescan the keypads to remove these buttonsI found I didn\'t need to do that as the settings Read/Write buttons are already gone post upgrade to this version.