+- Comfort Automation/ Security System Forums (https://www.comfortforums.com)
+-- Forum: Products (https://www.comfortforums.com/forum-3.html)
+--- Forum: GSM Module (https://www.comfortforums.com/forum-48.html)
+--- Thread: UCM/GSM4 -reporting and responses. (/thread-4467.html)
- sinky100 - 06-10-2016
Hi,
Having just fitted a UCM/GSM4 to my system (Comfort II), I am having a couple of issues with which I\'m hoping someone can assist with:
1. On changes to the comfigurator for responses using the UCM/GSM4, comfigurator advises the necessity to write to the UCM\'s EEPROM. On clicking YES, an error returns with \"UCM2 is not a UCM/GSM4\". This is despite the UCM being polled and listed as such in comfigurator. Is there a reason for this error? The UCM/GSM4 is working fine for SMS arming/disarming & control. I have attached some screenshots.
2. I have written a response which sends an SMS to 2 mobile phones, with custom message number 1. The SMS contains the following text also attached, but does not include the custom message.
Any assistance is ghreatly appreciated.
Iain
- sinky100 - 06-10-2016
Attachment 2
- sinky100 - 06-10-2016
Attachment 3
- sinky100 - 06-10-2016
Sorry guys,
The custom message has starting sending the full text, so I am only having the issue number 1.
Thanks,Iain
- slychiu - 06-10-2016
before writing to EEPROM, turn on the IO Monitor. if the error appears, Copy to Cliboard and let us have the Monitor IO contents
- Ingo - 06-10-2016
You running Comfort firmware 7.093 or above?
It might be this http://www.comfortforums.com/forum79/4352.html
- sinky100 - 06-10-2016
Slychui and Ingo,
Many thanks for your help. The upgrade of the comfort panel to the latest firmware version seems to have resolved the issue.
It seem I was running 7.06X, and the upgrade to 7.099 seems to have cleared the error. I will revert if it comes back.
Many thanks again,
Iain