+- Comfort Automation/ Security System Forums (https://www.comfortforums.com)
+-- Forum: Software Applications (https://www.comfortforums.com/forum-4.html)
+--- Forum: Comfigurator (https://www.comfortforums.com/forum-20.html)
+---- Forum: Comfigurator 3.x Old Versions (Archive) (https://www.comfortforums.com/forum-87.html)
+---- Thread: Comfigurator 3.11.6 (/thread-4488.html)
Pages:
1
2
- slychiu - 07-30-2016
Known Bugs
- If Input does not work for Input > 64 to 96. This also applies for older versions
- Deg C /deg F in Comfiguration flags is incorrect
- Optimum when adding UCM/KNX2 causes exception
- Read from KP06A or KP04A does not change the KP06A/KP04A settings in Comfigurator
- IRIO IR codes do not refresh when new IR codes are learned. Refresh button is needed
- Default template def40.cctx for UCM/Logic is missing from the installation. Please do File > Update Defaults to update the set of default templates.
- In Flags screen, if Check Status box is checked for a flag, the status is updated, but if the flag changes subsequently, the flag status in the centre pane is not updated until you go to another page and back, or uncheck and check the box (old bug)
- Export Scenario does not work. Selecting any items will cause an exception
- Actions for UCM/KNX2 did not work
- Importing a Configuration Item from a file with a different file system causes exception (old bug)
- Known Bugs in HIO and IRIO have been fixed
- Support for 4 Partitions in Comfort (requires Comfort Firmware 7.110)
- In Security > Zones, each zone has new settings for Partition and EOL shunts. These are for future Comfort features
- Support for UCM/Logic in File > New
- cc_uk - 08-02-2016
Partitions sounds great! Do you plan a post about that specifically to detail how it should be used?
- slychiu - 08-02-2016
Yes information about partitions is coming soon
- strickers - 08-05-2016
+1 for Partitions! Does that mean I can arm the garage while the house is unarmed?
- juwi_uk - 08-05-2016
Oooh that sounds like a good idea.
- slychiu - 08-06-2016
Yes, or the other way round. As long as the house and garage have separate entrances
- slychiu - 08-06-2016
Comfigurator [color=\"#ff0000\"]3.11.6[/color] is released
It supports the Partitions feature and new products IRIO, HIO, UCM/KNX2, UCM/Logic (some of which are not released yet)
Otherwise, everything else works as usual
- juwi_uk - 08-06-2016
You\'ve gone back in time; assume you mean 3.11.6.0 rather than 3.1.6!! :0)
- slychiu - 08-06-2016
corrected, thanks
Hopefully nobody got 3.1.6
- slychiu - 08-07-2016
Default template def40.cctx for UCM/Logic is missing from the installation. This can be fixed by File > Update Defaults to update the set of default templates.