+- Comfort Automation/ Security System Forums (https://www.comfortforums.com)
+-- Forum: Support (https://www.comfortforums.com/forum-2.html)
+--- Forum: Firmware History (https://www.comfortforums.com/forum-60.html)
+---- Forum: Slave Firmware (https://www.comfortforums.com/forum-78.html)
+---- Thread: Slave Firmware 7.118 (/thread-4562.html)
- slychiu - 11-22-2016
Known Bugs
- Strobe does not work on Slave. This is not a new issue
- Fixed bug SEM sent ack 4DH to Comfort which is only used by KP LCD and caused problems
Changes
- [color=\"#ff0000\"]Auto Detect LEM03 on SEM. LEM03 can be connected to the last SEM in the system[/color]
- Suppprt EL EOL query command. Supports software eol feature for setting of No EOL or Double EOL without use of Shunts (requires new Hardware)
- Accept single message from Comfort with 31 zone types at reset
- Support ID Button to set SEM ID (if button is present). Requires new hardware
- Handle rs485 comms status 92H message
- cc_uk - 04-14-2017
This version has been marked beta for a long time now - it is it likely to be released soon?
I note reference to soft EOL - I assume for a future version of hardware?
I thought a LEM03 wasn\'t supported when a SEP/SEM was in use on the system?
- slychiu - 04-15-2017
Thanks for the reminder. Yes it should be released soon
This will allow Slaves to support LRM03, so you could have
Comfort + LEM01 Zones 1 to 16
SEM #1 + LEM01 Zones 17 to 32
SEM #2 + LEM03 Zones 33 to 56
There should be no more Slaves after the LEM03
Hence if you had a Comfort with LEM03 and you want to add more zones, you can still use the LEM03
Yes the Soft EOL is for a future hardware where the zone shunts are eliminated
- cc_uk - 04-15-2017
That\'s great that a LEM03 could run off a SEM. Presumably though not if there are the full three SEMs on the system?
- slychiu - 04-16-2017
There should only be 1 LEM03, attached to the last SEM in the system, or to Comfort if there are no SEMs
- slychiu - 04-17-2017
LEM03 cannot bre connected if there are 5 SEMs in the system as that would edxceed the maximum 96 zones
- slychiu - 04-17-2017
SEM 7.118 firmware has been released
LEM03 can now be connected to the last SEM in the system.
Previously LEM03 could only be connected to Comfort if there are no SEMs in the system
see topic http://comfortforums.com/forum91/2069.html for LEM03 zone numbering system
- slychiu - 12-02-2017
Note that The Strobe output does not work on the Slave, ie when the Comfort strobe output is turned on, the Slave strobe does not turn on. A firmware upgrade will change this behaviour
- slychiu - 12-12-2017
There is a bug discovered in SEM 7.118 (and before)
The Strobe on the Slave does not turn on together with the Strobe in Comfort. A new firmware will be released to fix this
- slychiu - 12-12-2017
SEM 7.119 beta can be downloaded from https://www.cytech.biz/product_details.php?item_id=221
This fixes the Strobe problem