+- Comfort Automation/ Security System Forums (https://www.comfortforums.com)
+-- Forum: Products (https://www.comfortforums.com/forum-3.html)
+--- Forum: Door Stations (https://www.comfortforums.com/forum-86.html)
+--- Thread: DS01 - does it Need DM02? (/thread-5008.html)
- Kevin Farrel - 01-19-2019
Hi. Recently upgraded my plastic door station to a metal one DS01.
The sound quality is really poor.
Do I need to upgrade my DM01 to a DM02 also?
Or is it just tuning parameters I need to play with? Could you point out the correct tuning parameters/ which ones to adjust please?
Thanks
Kevin
- slychiu - 01-20-2019
DS01 is a bundle which includes PL11 (door sttaion), PL71 , PL81, RGR05 ringer and DM02DM01 should not affect the audio quality
Do you have Comfort 2, not Comfort 1?
You should upgrade the tuning parameters. Open a new file and write selective > select tuning parameters and write to comfort
That should improve the performance
- Kevin Farrel - 02-02-2019
Apologies
I have a new metal door station but an original DM01 (whatââ¬â¢s the difference between DM01 and DM02?)
I have comfort 2
Iââ¬â¢ll try reloading the parameters and see if that helps
- Kevin Farrel - 02-02-2019
Iââ¬â¢ve uploaded the tuning parameters and the volume of the person at the doorcstation whobos speaking, is really very quiet on the internal phone handsets
Any idea which tuning parameters I should play with, or do I need to do something with shunts?
The metal doorcstation replaced an old DP03X which worked just fine. Can I just swap them out of so I need to change something on The DM01?
- slychiu - 02-03-2019
DM01 is designed for Comfort 1, DM02 for Comfort 2.
which Comfort do you have? DM01 will not work well with Comfot2
see the attached DM01 manual there is a section on Connection to DS01 door station
- Kevin Farrel - 02-03-2019
Apologies - I do have DM02 and Comfort 2
So the question is, how can I make it louder on the internal telephones when speaking to someone at the door station?
- Kevin Farrel - 02-03-2019
Just looking at my DM02 - there is no Jumper 6!
The instructions say to change jumper 6 if connected to a DSO1 - which it is - but there is no jumper 6 on my DM02- it was purchased back in 2010
The sound quality on the telephone handsets is so poor, itââ¬â¢s basically unusable sadly - it was fine with the DP03X
- slychiu - 02-04-2019
J6 is not needed on old versions on DM02 as it is shorted in hardwareCan you check what are the shunts on the board, or take a high res photo of your DM02 so we can check which version iyt is