Periodic zone activation, setting of alarm. - Printable Version +- Comfort Automation/ Security System Forums (https://www.comfortforums.com) +-- Forum: Support (https://www.comfortforums.com/forum-2.html) +--- Forum: Problems & Troubleshooting (https://www.comfortforums.com/forum-36.html) +---- Forum: Troubles (https://www.comfortforums.com/forum-77.html) +---- Thread: Periodic zone activation, setting of alarm. (/thread-5137.html)

- sinky100 - 01-11-2020 Hi, I have periodic issues with my front door (zone 1) activating. I have re-terminated the door sensor and fitted a new mag switch but I have had another zone activation. I have looked at the log (below and attached) and can see that the zone is reporting activation/restores. Does anyone has an idea the cause? I don\'t want to keep bypassing the zone, and leaving the zone unprotected. Any assistance greatly appreciated. Thanks. Iain, 01/09 21:31 Sign in - User # System Response 01/09 21:31 Mode Change # Night Mode 01/10 06:32 Zone Activation # FrontDoor (1) 01/10 06:32 Alarm Type # EntryAlert (10) 01/10 06:32 Restore - Zone # FrontDoor (1) 01/10 06:32 Zone Activation # FrontDoor (1) 01/10 06:32 Restore - Zone # FrontDoor (1) 01/10 06:32 Zone Activation # FrontDoor (1) 01/10 06:32 Restore - Zone # FrontDoor (1) 01/10 06:32 Zone Activation # FrontDoor (1) 01/10 06:32 Restore - Zone # FrontDoor (1) 01/10 06:32 Zone Activation # FrontDoor (1) 01/10 06:32 Restore - Zone # FrontDoor (1) 01/10 06:32 Sign in - User # 1 01/10 06:32 Sign in - User # 1 01/10 06:32 Mode Change # Security Off 01/10 21:54 Sign in - User # System Response 01/10 21:54 Mode Change # Night Mode 01/10 23:10 Zone Activation # Backdoor (11) 01/10 23:10 Alarm Type # EntryAlert (10) 01/10 23:11 Restore - Zone # Backdoor (11) 01/10 23:11 Sign in - User # 1 01/10 23:11 Sign in - User # 1 01/10 23:11 Mode Change # Security Off 01/10 23:13 Sign in - User # 1 01/10 23:14 Bypass Zone # FrontDoor (1) 01/10 23:14 UnBypass Zone # FrontDoor (1) 01/10 23:45 Sign in - User # System Response 01/10 23:45 Mode Change # Night Mode 01/11 07:00 Sign in - User # System Response 01/11 07:00 Mode Change # Security Off 01/11 14:49 Sign in - User # 1 01/11 14:50 Sign in - User # 1 01/11 14:50 Sign in - User # 1 - slychiu - 01-12-2020 The possibilities are There us a fault on the front door zone There is a problem with the zone wiring to the dronr door, perhaps loose or interference dfrom pther sources If you have a spare zone, change the fromt door wiring and programming to the new zone. Or if you do not have a spare zone, exchange the zone with another one to see if the fault changes accordingly - sinky100 - 01-12-2020 Thank Slychiu, Will transfer the zone wire to a spare zone and see if that makes a difference, plus re-program for the change. Cheers,Iain - Home - 01-17-2020 Try wiring EOL that will highlight the fault. - sinky100 - 02-01-2020 Thanks. Out of the UK at the moment, so will try this when I get home. Luckily access is good, even if I need to replace the cable. Cheers,Iain