+- Comfort Automation/ Security System Forums (https://www.comfortforums.com)
+-- Forum: Support (https://www.comfortforums.com/forum-2.html)
+--- Forum: Problems & Troubleshooting (https://www.comfortforums.com/forum-36.html)
+--- Thread: Comfigurator Crashing (/thread-752.html)
- Warby - 08-06-2007
Hi
Whenever i execute this response from comfigurator the program abruptly close!
The response is working when it is running on composer. There are a few response the same but using differant Preset messages and linking to differant responses and they are shutting it down as well. I Have just updated to Comfigurator v2.2.1 bit it was doing it before that.
If Input LSM <> 0 Then
If Flag Flag01 = 0 Then
Dynalite LinearPreset 2 30 0 0 255
Do Dininggardanoff [Outside Formal Dining Off] After 180 Seconds Using Timer03 (it is line in the program)
End If
If Flag Flag04 = 0 Then
If SecurityMode = AwayMode Then
Do MBedLghtsOn [Master Bed lights On] After 20 Seconds Using Timer18
Do MbedLightsOff [Master bed lights off] After 300 Seconds Using Timer13
End If
If SecurityMode = VacationMode Then
Do MBedLghtsOn [Master Bed lights On] After 20 Seconds Using Timer18
Do MbedLightsOff [Master bed lights off] After 300 Seconds Using Timer13
End If
End If
End If
Thanks
- ident - 08-13-2007
Can you send your complete ccl file to support@cytech.biz so we can duplicate it?
Have you tried this using 2.2.1
- Warby - 08-13-2007
I Have tried it on V2.2.1 and it still does it! Will email it Promptly.
Thanks
- slychiu - 08-13-2007
In Configuration, Use Branch Actions is not checked. If you have Comfort II, can you try checking this box and see if the same problem occurs?
- slychiu - 08-16-2007
This has been traced to Comfigurator handling of long Responses, and will be fixed in the next release. Thanks for your feedback
- Warby - 08-16-2007
Thanks. I take it it is only a comfigurator issues and won\'t affect the operation of the alarm?
- slychiu - 08-16-2007
Just a Comfigurator problem, dont worry