UCM/232 HyperTerminal Issues

[idheath]

[user=86]ident[/user] wrote:

If you are able to receive reports IP0301 etc then that means that the connection has no problem

The problem may be due to the ID of the 2 UCMs set to the same
The UCMs by defaults are all set to ID=1 so one of the IDs must be changed to 2

Agreed re. receiving data.

I found out what the problem was. The ID\'s are different but the number of UCMs was set to 1 not 2. I updated this via Comfigurator and all\'s well.

Thanks