06-19-2013, 01:58 AM
Check the D11 (Green) and D12 (RED) LEDS
D11 (green) blinks if the UCM is receiving from the PC
D12 (red) blinks if the UCM is sending to PC
Log in on Comfigurator
When you send some info the D11 LED should blink, then the D12 Red led should blink when the UCM replies
If the D11 led does not blink that means that the data is not reaching the UCM, and that means your conection from PC to UCM is ot working
If D11 blinks but D12 does not blink that means a problem with UCM
D11 (green) blinks if the UCM is receiving from the PC
D12 (red) blinks if the UCM is sending to PC
Log in on Comfigurator
When you send some info the D11 LED should blink, then the D12 Red led should blink when the UCM replies
If the D11 led does not blink that means that the data is not reaching the UCM, and that means your conection from PC to UCM is ot working
If D11 blinks but D12 does not blink that means a problem with UCM