Firmware 7.113 is released. No significant difference from 7.112 except for the bug fix
Known Issues
Known Issues
- Execute Response in Comfigurator (DA) with multiple actions - security alarm actions eg bypass, Do Alarm cause subsequent actions do not work. eg Bypass zone 1, bypass zone 2, output 1 on Only Bypass zone 1 will work. However the Response executed by Comfort events will work
- Bypass action has other problem of clearing a memory bit
- After Upgrading firmware to 7.113, some unused zones (Null zone Type) may have Partition 3 setting, and this causes the system to be unable to arm, and causes the keypads to give a strange beeping sound. UCM and Keypad is unable to log in until the arming aborts after 5 minutes.
- Actions Add counter, Add counter give wrong answer from 7.039
- Partition keypad disarm does not off siren when disarm partition if there is a trouble alarm, until the code is entered 2 times
- CM9000- OPT firmware bug Clear all outputs action 8 does not work
- Do Action 190 serial command DABE does not do the actions following action 190 correctly. The 1st action is continually repeated