Show and Change Status of Counters, Flags, Outputs

[slychiu]

Show/Change Status in UCM/Cbus2

• Lighting
• Trigger
• Enable
• Measurement
  

For example in Lighting, the Cbus Group Address is mapped to Flags.  The Show status box when checked allows the status of the mapped Flag (and hence the Cbus group) to be displayed.




In the screenshot below, the Flag status is OFF. Click on the \"Off \" status to toggle the status to ON. This will affect the mapped c-bus  device.






If a Cbus group address is mapped to a Counter, the value of the counter can be displayed, and changed by entering a new value into the counter




This feature allows Cbus group addresses that are mapped to Comfort to be tested easily.