08-20-2015, 01:20 PM
Sure... Comfort has some pre-stored (vendor) IR codes and can \'blast\' them out via an IR Tx (https://www.cytech.biz/infrared_led_module.html) that is connected to the Comfort Panel.
Using this type of Dimmer Switch (http://www.varilight.co.uk/products/vplus-ir.html) replacing your single gang switch, it can be programmed to turn on/off/dim via these IR codes.
The idea would be that you centrally locate the IR Blaster in the room and then have multiple IR Dimmer switch plates controlling various lights. I suspect you could even control table lights via similar IR Switches.
One thing to note - This method is not status aware, in that you will be unable to query the status of lights (however you might be able to use Comforts \'counters\' to keep an eye on things?)
Vangelis
Using this type of Dimmer Switch (http://www.varilight.co.uk/products/vplus-ir.html) replacing your single gang switch, it can be programmed to turn on/off/dim via these IR codes.
The idea would be that you centrally locate the IR Blaster in the room and then have multiple IR Dimmer switch plates controlling various lights. I suspect you could even control table lights via similar IR Switches.
One thing to note - This method is not status aware, in that you will be unable to query the status of lights (however you might be able to use Comforts \'counters\' to keep an eye on things?)
Vangelis