We have found the cause of a strange bug where Scanning of Modules by Comfigurator detects UCM #1 as HDL, instead of General
This only happens after doing a sync of Keypad words on any LCD keypad KP04, KP04, KP06 using the keys *1 pressed together.
The workaround is to reset Comfort.
This happens up to Comfort firmware 7.050
This will be fixed in the next Comfort firmware 7.057
This only happens after doing a sync of Keypad words on any LCD keypad KP04, KP04, KP06 using the keys *1 pressed together.
The workaround is to reset Comfort.
This happens up to Comfort firmware 7.050
This will be fixed in the next Comfort firmware 7.057