KP04A/KP06A firmware 7.007

[slychiu]

The new  Firmware has the following changes;

1. Backlight turns on when the Keypad speaker comes on to make an announcement or in voice menu. The backlight is turned off after a few seconds when the speaker is turned off. This fixes the issue when the backlight turns off when arming or in voice menu or event log when no key is pressed. Pressing a key already turns on the backlight
2. Backlight remains on in Setup mode (long press * key) so the backlight does not go off while doing setup

KP06A beta firmware can be downloaded from https://www.cytech.biz/kp06a_firmware.html


KP04A beta firmware can be downloaded from https://www.cytech.biz/kp04a_firmware.html

[slychiu]

KP04A and KP06A firmware 7.007 has been released
Please upgrade in the usual way, ie right click on the keypad in the left pane and select \"Check for Upgrades\"

[Ian]

I have a KP06 running 6.010.
Is this different to KP06A?

[slychiu]

KP06 is the older version, its firmware is not compatible to KP06A. It is based on different hardware.

The features of Kp06A can be seen here
http://www.comfortforums.com/forum105/4357.html

One of the differences is that KP06A (and KP04A) support partitions in Comfort

The appearance is almost the same, and they use the same frames

[Ian]

Thank you.

[Ian]

I have a KP06A on my system.
When I \'check for firmware upgrades\' the firmware is 7.007. Comfigurator then tells me the latest is 7.010. I agree to update, follow the instructions and then get an error; \"Product number or type does not match\"

[slychiu]

Apologies, there was a mixup in the files on the serverPlease try again.
KP06A 7.007 is still the latestIt is KP04A which has gone to 7.010, mainly to support the EMS function

[Ian]

Thanks for getting back to me.