| Full Topic |
| Joined: | Wednesday Aug 9th, 2006 |
| Location: | Singapore |
| Posts: | 3493 |
| Status: |
Offline
|
Do not read the email using webmail as it would not work. The email must be downloaded to your phone
There is an attachment file with the extension .jrlccip eg myhome.jrlccip This is the same name as your cclx file except the extension is changed to jrlcccip
Open the attachment by tapping on it.
There will be a pop up box
"Open in Comfort"
and "Select Configuration to Use"
The Name is for identification eg Home or Office as you may have more than 1 Comfort system
The Internet and LAN IP addresses should be automatically filled up from the jrlccip file
Select Internet or LAN depending on whether the UCM/ETH02 is connected to the same LAN or if the connection is via the Internet
The connections for the IP Camera is below.
The selections are URL, Pro or Basic
URL may not work for IP cameras in most Android devices currently
The selections PRO or BASIC select either IP Cam Viewer Basic (free) or Pro (Pro) which is a 3rd party application for IP cameras which support hundreds of IP camera brands. You will be prompted to download the appropriate app from Google Play Store when you go to the cameras page
Press Update or the back button to return to the select Config page
Select the configuration if there is more than one, eg Home, Office
You should see the Login page as in the screenshot below
The system name is shown in green eg Home in the above screenshot
Notice the "Connected" status above the Name. This means the app is connected to Comfort. This means you can enter the user code and press SEND
Also notice the wifi symbol on the top left. This shows the system is able to connect
If a key symbol is seen that means the connection may not be correct. Check that the Internet/LAN selection is correct
After entering the user code and SEND, the status will change momentarily to "Logging in". If the connection is slow the "logging in status" may remain for a few seconds.
If the code is correct, the Keypad page will be shown
The Comfort Keypad is shown on the left screen, while the Zones status is seen on the right
The LED indicators at the bottom of the keypad, "Disarmed", Arm", "AC", "Msg" are identical to the LEDs on the Comfort keypad.
The Disarmed Green led is shown lighted above to indicate that the system is disarmed
If the user code is incorrect, "Invalid Login" will be seen. Enter the correct code to log in
The status "Not Connected" may be seen when the system has logged you out due to time-out. Just enter your user code to log in
If there is no activity for a period determined by the "Connection Timeout" setting in the UCM/ETH02 DS Manager software, the app is logged out (disconnected) and there will be a message
"You Have been Logged Out". You will go back to the login screen to log in again
This is for security purposes to prevent someone from using your phone after it has been logged in and left around
Last edited on Sunday Jan 20th, 2013 05:32 am by ident
| Close Window |