View single post by ident

Posted: Sunday Jan 20th, 2013 05:38 am

Joined:	Wednesday Aug 9th, 2006
Location:	Singapore
Posts:	3493
Status:	Offline

To arm the system, press one of the keys "Away" Night", or "Day" just as on the physical keypad. Away Mode means everyone is leaving the premises, and the entry door must be opened and closed. Arm to Night and Day Mode when people are still remaining in the premises

If the connection is by "Internet" instead of "LAN", a window will popup asking for your user code again as extra security

This will not appear if the connection is by LAN (ie inside the house)

If any windows and doors are open, they will be shown above the keypad

When the doors or windows are closed "Please Exit" will be seen if the connection is local ie LAN, with a count down of the time remaining

If the connection is "Internet" ie remote, there will not be a count down, and the system will arm immediately

You can also "Force-arm" the system (provided the settings allow you to do so) by pressing the # key if any zone is open. This automatically bypasses all open zones until they are closed again allowing you to arm the system

When armed, the status can be seen on the keypad

The Armed red LED turns on and the Lock (Away) button on the top right will flash indicating Away Mode if the system is armed to Away. The Night (moon) and Day (sun) buttons will similarly flash if armed to these modes

If the system is armed and the entry door is opened, it will start an entry delay. On the phone, the entry time will show a count down

To disarm the system, enter your user code and # key

If there is an Intruder, Panic, Tamper, Trouble or any other alarm, this will be shown above the keypad in Red letters

Last edited on Sunday Jan 20th, 2013 05:40 am by ident

Close Window