View single post by ident | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Posted: Monday Oct 7th, 2013 02:04 pm |
|
||||||||||||
ident
|
Sample Configuration The cclx file blindshvactest.cclx attached has the configuration descrbed here. Thermostats 1 and 8 are programmed for this example The common parameters by default are; Max Heating Temp = 30 Min Heating Temp = 16 Max Cooling Temp = 26 Min Cooling Temp = 16 Hysteresis = 1 These can be changed as required Thermostats 1 and 8 are programmed in the example Thermostat 1 Sensor = 1 Flag = 1 Heating Output 8 Heating Setpoint Counter 2 Cooling Output 9 Cooling Setpoint Counter 3 Thermostat 8 Sensor = 8 Flag = 8 Heating Output 10 Heating Setpoint Counter 2 Cooling Output 11 Cooling Setpoint Counter 3 Note that you are not allowed to select any Outputs that are used for other purposes like Security Status Outputs, Blinds, and Responses The Home Control Menu shows how it can be used to set temperature setpoints turn the thermostats on and off and read the temperature of the Thermostats 1 and 8 The "Execute Response" link on each control menu action key allows the programmed response to be activated for testing. Execute Responses is also available in the Responses page. The Feedback is programmed as Sensor 1 so that the temperature can be heard or seen Next we will show how KT03 can be used to control the thermostats Attachment: blindshvactest.zip (Downloaded 13 times) Last edited on Monday Oct 7th, 2013 02:07 pm by ident |
||||||||||||
|