| Full Topic |
| Joined: | Monday Oct 13th, 2014 |
| Location: | |
| Posts: | 47 |
| Status: |
Offline
|
Select the configuration to load data, then it will show" configuration data loaded" , next press "SETUP" to check IP address and Port number. Assuming you used UCM/ETH03 to program the Comfort, the IP address and Port number will be loaded too, so no need to add the IP address and Port number.
If you were not using UCM/ETH03 eg UCM/USB , then the saved cclx wil not contain the correct IP address and Port Number.
The IP Address and Port for ETH03 should be shown in the LAN field. The Internet IP Address and Port are also shown if you have entered these fields in the Comfigurator cclx file.
System Name
Enter Name for comfort system, i.e. Room, Home, Office
Internet
It allows you to access to Comfort System remotely by internet.
LAN
It allows you to access to Comfort System locally by LAN.
Password(Below LAN)
Once you enter the password there, you will not be asked for the user code when you log in locally.
Open Cameras With IP Cam Viewer
It is a 3rd party application to access the IP cameras. If you select this option, going to the cameras page will leave the Comfort app and launch the IP cam viewer app. Management of the IP cameras will be by that app, so the IP address and Port will not be used.
The connecting status on the bottom should show connected if the Internet/LAN button has been selected correctly and the IP address, Port number are correct. If not, it may show Data Error. If “connected†status is shown, press the button “Loginâ€. If you entered the password in SETUP for this comfort system, then you can log in without entering password.
Last edited on Friday Mar 6th, 2015 05:49 am by
| Close Window |