View single post by CytechMartin
 Posted: Tuesday Oct 28th, 2014 06:54 am
 PM  Quote  Reply  Full Topic 
CytechMartin



Joined: Monday Oct 13th, 2014
Location:  
Posts: 47
Status: 
Offline

  back to top

The next screen gives you an option to select a configurations in the iPad app. You can add new comfort systems in Setup. Initially you will see "Default". This can be renamed as required.




Select the configuration to load data, then it will show" configuration data loaded" , next press "SETUP" and select the corresponding configuration.  The IP Address and Port in the cclx file (in Options > Settings > UCM Connections) will be automatically loaded.





System Name
Enter Name for comfort system, i.e. Room, Home, Office

Internet
Enter IP address and Port which allows you to access to Comfort remotely by internet.

LAN
Enter IP address and Port to access to Comfort locally by LAN.

Password (Below LAN)
The user code is saved so you do not need to enter it when logging in locally (by LAN). You will be required to enter the code when connecting by Internet for security reasons

Open Cameras With IP Cam Viewer
This  is a 3rd party application to access the IP cameras. If you select this option, going to the cameras page will leave the Comfort app and launch the IP cam viewer app. Management of the IP cameras will be by that app, so the IP address and Port will not be used. The Cytech App does NOT support cameras by itself




The connecting status on the bottom should show connected if the Internet/LAN button has been selected correctly and the IP address, Port number are correct. If not, it may show Data Error. If the “connected” status is shown, press the button “Login”. If you enter the password in SETUP for this comfort system, then you can log in without entering password (for LAN connection only)


Last edited on Tuesday Mar 31st, 2020 11:49 am by

 Close Window