View single post by slychiu | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Posted: Wednesday May 13th, 2015 01:15 pm |
|
|||||||||
slychiu
|
How to display the control icon in the Control Page of the Comfort App On/Off Button The On/off button is most commonly used in control menu to switch ON/Off lights or other appliances. To view an On/Off button in the control page, the programming in Comfigurator must satisfy the following conditions.
If the device has a valid feedback in the control menu, but the actions consist of more than 0 for off or 1 for ON, e.g. OFF, ON, Toggle, what you see in the App is picture 3 below, without the On/Off button. If you click the status "Off" for Lamp 1, you will see picture 4 showing the actions Off, On and Toggle If the device does not have feedback, picture 3 below is what you see in the App. There is no feedback status, and "View Action" button is seen in its place. Once you click "view Actions"you will see picture 4 below with a list of actions Slider Bar When you choose counter as the feedback and there is no action for the control key, ie no On, Off or other action, then a Slider Bar will appear in the App. The Slider Bar will change counter value from 0 to 255. Normally the Slider Bar is used for dimming. e.g. a dimmer is mapped to a counter in UCM/Cbus, so that the counter value will denote the dimming level 0 for 0%, 128 for 50% and 255 for 100%. Las Last edited on Monday Jul 20th, 2015 05:20 am by |
|||||||||
|