back to top

1. Zwave Mulitlevel Switch values 0 to 99 when mapped to counters are converted to range 0 to 255 and vice versa when changing counter values, 0 to 255 are converted to range 0 to 99. Zwave value of 255 is not changed, ie it is also 255 in the counter. This allows the slider in the Comfort app to represent the full range of Zwave dimming levels from 0 to 99.  Please check of this will affect whatever application you have for UCM/Zwave
   
2. For the above, note that sending a counter value of 255 to the mapped zwave multilevel switch will set the value to full brightness (level 99) instead of setting the last level before switching off. In order to set the last On level, send the zwave ON command using  the Zwave action code.
3. Fixed Bug - Priority Polling mode which is enabled by UCM CM control menu command did not work for Flags, it only worked for counters. Priority pollling mode allows UCM/Zwave to poll the Zwave nodes which are programmed in Comfort control menu used in Comfort apps or keypads so that when the Zwave devices is controlled by other zwave devices or by manually pressing the on/off button, the status is almost immediately updated in  the control menu status value

Last edited on Saturday Jul 18th, 2015 10:07 am by slychiu