View single post by slychiu | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Posted: Saturday Sep 19th, 2015 05:26 am |
|
|||||||||
slychiu
|
Expansion Modules Comfort comes with 8 Zones/inputs 1 to 8, and 8 outputs 1 to 8 You expand the inputs and outputs by adding Local Expansion Modules (LEM) and Slave Expansion Modules (SEM/SEP) See this topic http://www.comfortforums.com/forum91/2068.html For Input/Output numbering system on Comfort, Slaves and LEMs see http://www.comfortforums.com/forum91/2071.html Note that only 1 LEM01/LEM02 can be connected to Comfort Control Panel and each Slave. The difference between LEM01 and LEM02 is that LEM02 has no outputs. If the Comfort controller does not have an LEM connected, the Inputs and Output numbers are "lost", they do not get assigned to the next Slave If Slave 2 is not connected, but Slave 3 is connected, Slave 3 has inputs/outputs numbers 57 to 64 and not those of Slave 2.
|
|||||||||
|