slychiu
Joined: | Saturday Apr 29th, 2006 |
Location: | Singapore |
Posts: | 5495 |
Status: |
Offline
|
back to top
|
Check if you connection is Remote or Local in Setup
If it is set to Local, it is like local arm and you must exit via the entry door in order to arm. "Arm Failure 0" - 0 refers to the zone number which caused the arm failure. Zone 0 means no zone was triggered, hence the entry door was not opened and closed
Set connection to remote so that exit is not needed.l If all zones are closed the system arms - this is the same as Remote arming by phone - no exit needed
|