View single post by timop001
 Posted: Wednesday Aug 15th, 2018 08:42 am
 PM  Quote  Reply  Full Topic 
timop001

 

Joined: Friday Aug 8th, 2008
Location:  
Posts: 58
Status: 
Offline

  back to top

SOLVED: the Kate.ini file used by VoiceProc to create the custom vocab must have vocabNo set to 254 to indicate to Comfort that it is using a custom vocab and VocustNo must be set to the same value you give to the custom vocab in Cytech/Comfigurator3/Config/vocust.cfg e.g.

VocabNo=254 ;changed to 254 to use TN custom vocab
VocustNo=02 ;changed from 255 to coincide with the Custom directory TyNant in vocust.cfg file in Comfigurator
VocSysVer=39
VocUserVer=1
VocTextVer=2
LCDVer=3
WavesDir=kate.wvd
CompressedDir=kate.dat
VCD_Quality=mid
VocabularyFileName=kateTN.bin ;changed TN
SentencesFileName=sentence36.tab
LCDFileName=lcdkp_v38.cfg
MaxSentenceLength=10
NumOfSysWords=207
SetVol=0.6
TranslationFileName=translat36.tab
NumOfUserWords=141
UserFileName=residTN.tab ;changed TN
NumOfTables=5

Customising the vocab may seem daunting but is straightforward in practice. VoiceProc is obviously primarily a developer tool released to users but works well. Edit the resid.tab word file by hand using the .wav files in folder Kate.wvd as a guide to the words available.Make sure you create new unique file names for Kate.ini, Kate.bin and Userfilename=resid.tab otherwise your original files will get overwritten.Run through VoiceProc. Pay attention to the message tab to check there were no errors. Move new.cfg and the main new.bin files to Cytech/Comfigurator3/Config/

Modify vocust.cfg...

>Custom WordList
00=Spanish Comfort I,cs-wl-sp.cfg,sentence_spa.cfg
01=Maria Cyprus Customised,maria.cfg,sentence.cfg
02=TyNant,KateTN.cfg,sentence.cfg

Upload the vocab using Comfigurator. Takes about 30min and can generate errors. In that case restart. It gets there eventually. With Comfort2 v7.116 Ethernet - I didn't need to disable Slaves and it updated through the network.

Thanks for the help Chiu...
 Close Window