View single post by John W | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Posted: Saturday May 30th, 2020 10:02 am |
|
||||||||||||
John W
|
Swiss-Toni wrote: Other than moisture creating the problem, other posibilities elctrical strands faulty components the list could be potentialy endless the boards touching, but from what i can see the fault lies in arcing (shorting out). other than what I have said and seen I could not suggest anything at all. Swiss-Toni Thanks again for your replies. The boards don't touch, their distance is governed by the connectors.There were/are no strands floating about. I will give the cabinet a good clean, and check the heater is actually working, as that's the only thing aside from the board substrate or connector breaking down I can think of. Oh, and check the vent is not blocked. The only thing above this board is the loop of the grey cat5 cable. I have some things to try, then decide how best to proceed. Thanks again.
|
||||||||||||
|