View single post by slychiu | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Posted: Sunday Sep 6th, 2020 07:38 am |
|
||||||||||||
slychiu
|
We have found the problem with the output states in the Cbus to Comfort window If a Cbus Group address is mapped to an Output, that means the Cbus address will control the output eg in the program below, Cbus lighting address 32 Controls Output 22 Cbus address 33 controls Output 23, Cbus address 34 controls Output 24 on Comfort This works correctly, the cbus addresses control the Outputs as expected. However the Status shown in this window is wrong eg Output 23 status is shown in Output 22 position, Output 24 status is shown in Output 22. The Output status in Comfort Registers is correct. The wrong Output status is only in the Cbus to Comfort screen. This will be fixed in the next version along with other changes In the screenshot below, Outpot 23 is Off, Output 24 is actually On, but the status shows and Output 23 is On and Output 24 is OFF . Attachment: cbusouts.jpg (Downloaded 8 times) Last edited on Sunday Sep 6th, 2020 07:41 am by slychiu |
||||||||||||
|