View single post by Ghyllwood

Posted: Sunday Mar 16th, 2025 11:57 am

Joined:	Friday Mar 27th, 2009
Location:	Beverley , United Kingdom
Posts:	58
Status:	Offline

Thanks Chiu, I remember the old touch screen was a modified CBUS UCM, so wanted to check the network UCM had the correct ID. And yes, the red and green lights are blinking slowly.
First of all, I updated the Configurator to V3.14.14.0 I have spent nearly 2 days and no nearer a solution. The Network UCM can be accessed from the computer, but it is not talking to Comfort; it just says failed to connect to UCM. The UCM doesn't communicate at all, to update the date and time either.
This all started when I removed a redundant KT03 touch screen keypad. I updated comfort several times with very small changes and then it just stopped communicating with anything; system information time update, etc.
Then I noticed the Fermax door release was permanently on and buzzing, so I have removed the DM02 from the system. But it will still not communicate.
Initially it said communication failure Keypad 1, which was the one I removed, so I changed the Keypad ID of No6 to No 1 and the keypads are all saying failed to connect to Keypad No 6, which is expected, as Comfort thinks there are 6, until I upload the modified file. So the keypads and UCM's are all talking internally, but I cant update the Comfort main board from the computer.
I have exhausted all sense of logic now and going around in circles, Can you think of what to test next to get the UCM talking to the Comfort main board?Thanks

Attachment: Comfort.jpg (Downloaded 11 times)

Last edited on Sunday Mar 16th, 2025 11:58 am by Ghyllwood

Close Window