Comfort  Automation/ Security System Forums Home
Home Search search Menu menu Not logged in - Login | Register
Comfort Automation/ Security System Forums > Products > GSM Module > Extending the distance of UCM/GSM from Comfort

Extending the distance of UCM/GSM from Comfort
 Moderated by: admin
 New Topic   Printer Friendly 
 Rate Topic 
AuthorPost
 Posted: Friday Oct 2nd, 2009 04:16 am
   
1st Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 5493
Status: 
Offline

  back to top

The new ADM02 (Auxlillary Distribution Module) pictured below has additonal terminal blocks for 12V/COM, KA/KB and MIic/Voice and 4 way connectors (KA/KB/12V/COM) to supplement the terminal blocks on Comfort



In addition, it also allows the UCM/GSM module to be located remotely from Comfort.
There is a 5 way GSM connector on the new ADM02. This plugs into the J54 GSM connector on Comfort.
Use the terminal blocks for GSM Audio (SP+, SP-, MIC+, MIC-) to connect a shielded CAT 5 cable to the same pins   on another ADM02 Module (SP+, SP-, MIC+, MIC-) which is then connected to the UCM/GSM which can be far away

Hence you need 2 ADM02



Last edited on Thursday Nov 14th, 2013 01:44 am by



 Posted: Tuesday Nov 17th, 2009 02:08 pm
   
2nd Post
rolan
Member
 

Joined: Tuesday Feb 20th, 2007
Location: Russia
Posts: 9
Status: 
Offline

  back to top

For remote installation two 5-way cables are required then per above. Will you ship ADM02 with add'l 5-way cable as only one comes with GSM module?

regards, rolan



 Posted: Tuesday Nov 17th, 2009 02:23 pm
   
3rd Post
ident
Administrator


Joined: Wednesday Aug 9th, 2006
Location: Singapore
Posts: 3493
Status: 
Offline

  back to top

yes, GSM cable is included with ADM02



 Current time is 04:01 pm
Comfort Automation/ Security System Forums > Products > GSM Module > Extending the distance of UCM/GSM from Comfort
Top




UltraBB 1.172 Copyright © 2007-2014 Data 1 Systems