Slave Siren, Strobe and Speaker can be used on Slave
Fixed Bug - initial value of Slave zones reported after reset to Comfort is wrong but subsequent activation is correctly reported. This causes incorrect initial report to Cbus etc
Fixed Bug - Slave zones with Zone Types 17 to 31 all have Sensitivity highest ie 10 ms
Fixed BUG - at reset Slave zones which are ON were reported as OFF then ON
Slave Speaker Output enabled. Outputs same signal as Comfort. Requires Comfort 5.167 and above
Slave STROBE Output enabled. Follows Strobe on Comfort. Requires Comfort 5.167 and above