Comfort Automation/ Security System Forums > Third Party (interfacing to Comfort) > KNX (EIB) > KNX as Input modules |
Moderated by: admin |
Author | Post | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
WMADKOUR Comfort Installers
|
I have a project that using 10 units of RIO modules and we need over 9 Keypads plus touch screen, so we think of using KNX input push button modules and touch screen to be the main controlling units (through KNX bus c/w power supply & UCM/KNX2). so what is the possibilities of stable operation using KNX input modules and limitation of using. thanks |
|||||||||
admin Administrator
|
KNX Inputs can activate Counter Responses to control anythinbg on Comfort. This is a well established method and works well, if that is what you need to do. I am not sure I understand your meaning though |
|||||||||
WMADKOUR Comfort Installers
|
ok, simply i have a system that consumed all Sem's & Lem's and 11 RIO so far that left me with 4 SCS only . My Client request 10 SCS so i used KNX interface to install the 11 SCS actually each SCS has 11 buttons, which it means 110 dedicated counter is that right? |
|||||||||
ident Administrator
|
I dont know what you mean by using KNX Interface to install 10 SCS Do you mean you use KNX switches in place of SCS? |
|||||||||
WMADKOUR Comfort Installers
|
what i meant is using UCM-KNX to interface comfort to the 11 KNX Busch-triton Switch |
|||||||||
ident Administrator
|
OK then you can assign the 110 counters to the group addresses provided you still have spare counters |