Comfort  Automation/ Security System Forums Home
Home Search search Menu menu Not logged in - Login | Register

Velbus Temperature Control
 Moderated by: admin
 New Topic   Reply   Printer Friendly 
 Rate Topic 
AuthorPost
 Posted: Monday Sep 27th, 2010 05:33 pm
   PM  Quote  Reply 
1st Post
Billan
Comfort Installers


Joined: Friday Feb 29th, 2008
Location: Athens, Greece
Posts: 21
Status: 
Offline

  back to top

How it should be the responce that comfort announce the temperature value correctly?

I try this one:

Get sensor register
Say Degrees

I'll try to calibrate the value (i change it to 7,5) from velbus link but i thinks its not the correct way.



 Posted: Tuesday Sep 28th, 2010 03:33 am
   PM  Quote  Reply 
2nd Post
hendy
Cytech


Joined: Wednesday Sep 19th, 2007
Location: Singapore
Posts: 221
Status: 
Offline

  back to top

First, add one UCM as Velbus type in Comfigurator > Modules tab > UCM's.

Then on the UCM/Velbus page, go to 'Velbus to Comfort' tab and Add the temperature sensor module (currently support VMB1TS) and assign it to one of the Sensors in Comfort.

When the sensor Register is updated with a new value from Velbus, it also activates the Sensor Response in Comfort tab > Events > Sensor Responses; hence put the announce temperature response here.



 Posted: Tuesday Sep 28th, 2010 05:29 am
   PM  Quote  Reply 
3rd Post
Billan
Comfort Installers


Joined: Friday Feb 29th, 2008
Location: Athens, Greece
Posts: 21
Status: 
Offline

  back to top

I did this, but what is the response that should fix it?



 Posted: Tuesday Sep 28th, 2010 06:00 am
   PM  Quote  Reply 
4th Post
hendy
Cytech


Joined: Wednesday Sep 19th, 2007
Location: Singapore
Posts: 221
Status: 
Offline

  back to top

In your first post,

Get Sensor Register #
Say Degrees

are the correct actions to put inside the Sensor Response.
Take note that Sensor Responses will only be triggered upon a change in temperature.

If you want the temperature to be announced in other situation, you can put the response in other event, let's say in one of the scene button on Comfort RC01 remote control.



 Posted: Tuesday Sep 28th, 2010 05:22 pm
   PM  Quote  Reply 
5th Post
Billan
Comfort Installers


Joined: Friday Feb 29th, 2008
Location: Athens, Greece
Posts: 21
Status: 
Offline

  back to top

keypad only announced "zero degrees"

I just sent the cclx file to support for check.

Last edited on Tuesday Sep 28th, 2010 05:30 pm by Billan



 Current time is 08:31 am
Top




UltraBB 1.172 Copyright © 2007-2014 Data 1 Systems