Posted: Wednesday Sep 20th, 2006 02:14 pm |
|
1st Post |
ident
Administrator
Joined: | Wednesday Aug 9th, 2006 |
Location: | Singapore |
Posts: | 3493 |
Status: |
Offline
|
back to top
|
The situation addressed by this topic is;
When doing a remote Intercom to Voice Station (Keypad) or Door Station, the voice heard on the keypad is intermiitenltly loud then soft.
This is caused by feedback from the keypad/Door Station speaker to its own microphone. Comfort tries to compensate for the echo by reducing the speaker volume when the microphone picks up too much echo.
The remedy for this is to reduce the MIC gain using the trimmer next to the Comfort main board. The Door Stations and Keypads have their own trimmer. Turn anticlockwise to reduce gain. This whould allow stable volume on both ends
The setting of the trimmer depends on telephone line conditions depending on the location of the house so the factory default adjustment may not be optimium
Cuyech will come up with a guide to getting the best results from the Intercom in the near future
|
Posted: Monday Nov 6th, 2006 04:08 pm |
|
2nd Post |
garym999
Member
back to top
|
When writing the tuning guide please could you remember all the places to tweak ?...
Comfort Main Board
KP Mic - VR51
DP Mic - VR53
Comfigurator
Phone Voice Level
Phone Intercom Level
Door Station
VR1A
Door Module
Mic - VR1
Voice - VR2
With so many places to make adjustments it would also be handy to know how they interact and what they do.
|
Posted: Tuesday Nov 21st, 2006 02:50 am |
|
3rd Post |
|