Comfort Home Automation/ Security System Forums Home

 Moderated by: admin  
AuthorPost
siamak
Member


Joined: Monday Mar 1st, 2010
Location: Tehran, Iran
Posts: 17
Status: 
Offline

  back to top

I tried to set a counter to the sensor register #8 witch is for the SCS with ID 1. Then I added a temperature box on the screen and set the counter number 5. I'm a little confused what application number should it be. I couldn't find in kt manual too.

regards 

slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 4583
Status: 
Online

  back to top

Siamak
I dont know what you mean by application number

To display temperature in degrees C on the KT03, create a Value Element
This is a button that displays a number 0 to 255

In Status Properties, set Status Type = Sensor Register, and set Sensor Number to the sensor corresponding to the SCS that you have.
SCS ids 1 to 15 correspond to Sensors 8 to 23
Hence SCS 1 corresponds to Sensor Register 8

The number in the sensor registers is in degrees Fahrenheit because this is what is provided by the SCS temp sensor

To convert it to Celcius and display as such, go to Events > Sensor Responses, and assign a Response to convert F to C

Get Last Sensor
Convert F to C
Save Last Sensor



Attachment: Tempsense.jpg (Downloaded 49 times)

slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 4583
Status: 
Online

  back to top

A cclx file with KT03 displaying temperature in degrees C is attached

Attachment: dollhouse.zip (Downloaded 14 times)

siamak
Member


Joined: Monday Mar 1st, 2010
Location: Tehran, Iran
Posts: 17
Status: 
Offline

  back to top

Thank you very much.


UltraBB 1.172 Copyright © 2007-2014 Data 1 Systems