The new UCM/KNX Firmware 5.234 can be downloaded from http://www.cytech.biz/ucmknx_firmware.html
A new UCM/KNX manual is also available from http://www.cytech.biz/ucmknx_manual.html
Known Issues
- KNX relative dim levels are wrong when SCALE switch is shunted
- KNX Floating point EIS5 calculation wrong
Bugs Fixed- When zones are bypassed from Comfort, the mapped KNX group address is not updated with the bypass state
Note that Comfigurator 3.2.9 allows the UCM/KNX Physical address to specify Area 0 (previously areas 1 to 15 only), Line 0 (previously 1 to 15 only) and Address 1 to 255 (previously 1 to 200). This is not a firmware function
Last edited on Saturday Dec 31st, 2011 03:21 am by ident
|
