Comfort  Automation/ Security System Forums Home
Home Search search Menu menu Not logged in - Login | Register

KP06 Firmware 6.001
 Moderated by: ident
 New Topic   Reply   Printer Friendly 
 Rate Topic 
AuthorPost
 Posted: Wednesday Nov 7th, 2012 02:15 am
   PM  Quote  Reply 
1st Post
ident
Administrator


Joined: Wednesday Aug 9th, 2006
Location: Singapore
Posts: 3493
Status: 
Offline

  back to top

  1. Renamed the setting page from "Alarm Broadcast" to "Voice Broadcast"
  2. All LCD pixels turn on for 2 seconds, upon boot-up.
  3. Improved LCD display handling. Improved an intermittent off-sync display problem
  4. Implemented  LEDs indication during KP06 firmware upgrading Home Off = stage 1, On = stage 2, Armed On = receiving data, processing received data., AC On = transmitting data.Message On = in flash operations.
Known Bugs
If a KP06 is installed at ID#1 and a 2nd KP06 is connected with the same ID without switching off the power, the ID of the 2nd KP06 cannot be changed using the * menu. The workaround is to reset Comfort. This applies to previous firmware
The latest KP06 Firmware can be downloaded from http://www.cytech.biz/kp06_firmware.html?category_id=101

Last edited on Thursday Dec 13th, 2012 01:56 am by



 Current time is 06:36 pm
Top




UltraBB 1.172 Copyright © 2007-2014 Data 1 Systems