Posted: Sunday Sep 29th, 2013 07:47 am |
|
21st Post |
slychiu
Administrator
Joined: | Saturday Apr 29th, 2006 |
Location: | Singapore |
Posts: | 5495 |
Status: |
Offline
|
back to top
|
Please note a new bug confirmed below
Selective Write does not select Control Menu when Responses change which are assigned to the Control Menu. To workaround, please use Full WRITE. This may be a bug from older versions and not new to 3.7
|
Posted: Thursday Oct 3rd, 2013 12:29 pm |
|
22nd Post |
ident
Administrator
Joined: | Wednesday Aug 9th, 2006 |
Location: | Singapore |
Posts: | 3493 |
Status: |
Offline
|
back to top
|
The next version 3.7.6 is expected to be the released version after final tests. This mainly fixes bugs from earlier versions
Bugs fixed- Reading from Comfort caused an exception if a write to Comfort has not been done
- Blinds function has been fixed
- Thermostat function has been fixed
- Action "If Last Security Mode" only could "Security Off"
- GSM4 - Get status interrupts caused Firmware Upgrade for GSM4 to fail repeatedly.
- Links to manuals were not complete in each Module
- Selective Write did not select Control Menu when Responses change which are assigned to the Control Menu.
New Features- Edit > Autogenerate Names will also autogenerate Response names from Actions codes similar to Read from Comfort with the "autogenerate" option.
- Action 189 for blinds function has been implemented
- Zwave configurator major improvements to (described later)
- GSM4 Configurator has been implemented (described later)
- Heatmiser Configurator has been implemented (described later)
A full description of the changes for 3.7.6 from the last version 3.6.8 shall be given in a new topic
|
Posted: Thursday Oct 3rd, 2013 07:41 pm |
|
23rd Post |
Home
Comfort Distributors
Joined: | Wednesday Jul 12th, 2006 |
Location: | United Kingdom |
Posts: | 771 |
Status: |
Offline
|
back to top
|
juwi - the pictures are obviously a screen shot but how do you get the torn edge effect?
|
Posted: Thursday Oct 3rd, 2013 07:44 pm |
|
24th Post |
Home
Comfort Distributors
Joined: | Wednesday Jul 12th, 2006 |
Location: | United Kingdom |
Posts: | 771 |
Status: |
Offline
|
back to top
|
Another thing !
We have been to attend several old C1 installs and tried to extract the program file using Comfig 3 - - - - no luck
We have had to go back to the old 2.2.3 extract the file and then upgrade and then re-load .cclx using C3
|
Posted: Thursday Oct 3rd, 2013 07:48 pm |
|
25th Post |
Posted: Thursday Oct 3rd, 2013 11:42 pm |
|
26th Post |
slychiu
Administrator
Joined: | Saturday Apr 29th, 2006 |
Location: | Singapore |
Posts: | 5495 |
Status: |
Offline
|
back to top
|
Send us the ccl files of the C1 systems that you read from Comfort so we can try to check with C2
|
Current time is 08:11 am | Page: 1 2 |
|