Moderated by: ident | Topic closed |
Author | Post | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
admin Administrator
|
The UCM/ETH03 is a new ethernet interface for Comfort that replaces the UCM/ETH02 with many new functions. The link to the UCM Manual which includes UCM/ETH03 is http://www.cytech.biz/ucm_manual.html The UCM/ETH03 allows Comfigurator and other 3rd party software, as well as the Comfort iOS and Android apps to work with Comfort The Comfort Server Manager sets up the IP address of the UCM/ETH03. This is included in Comfigurator 3.7.8 and above. In Comfigurator, Select Options > Settings > UCM Interface = Network Local The Comfort Server Manager link is shown Click on Comfort Server Manager. NOTE THAT COMFORT SERVER MANAGER CAN ONLY WORK ON THE SAME NETWORK AS THE UCM/ETH03, NOT FROM INTERNET The window should show all UCM/ETH03 that are connected physically to the network. It is in blue colour if it is on the same subnet, otherwise it will be shown in red. The current firmware version for the UCM/ETH03 is shown (1.07 in the above example). The Status of the UCM/ETH03 will normally be shown as "idle"; if there is a connection, the Status field will show "busy". The IP address of the UCM/ETH03 is found by the discovery process. The default IP address setting has DHCP so the IP address will be automatically assigned by a Router with DHCP enabled. It is recommended to assign a fixed IP address for UCM/ETH03, making sure that it does not conflict with any assigned IP address on the network, as you will need to enter the IP address of the UCM/ETH03 in Comfigurator and for the purpose of allowing Port Forwarding for remote access. Uncheck the DHCP checkbox
Click the 'Submit' button to effect the new changes. Press the 'Refresh' button once to rediscover the UCM/ETH03s in the network Clear List button clears all the display on the Comfort Server Manager screen. Reboot button reinitialises ETH03 submodule without changing any parameters. Web (demo) and Upload Web buttons are for future use. Last edited on Sunday Feb 11th, 2018 09:51 am by |
|||||||||
ident Administrator
|
The UCM/ETH03 now supports these new features:
Comfort Server Manager In Comfigurator, the latest version of Comfort Server Manager will be downloaded when you run it from Options> Settings > UCM Interface = Network Local or Internet NOTE THAT COMFORT SERVER MANAGER CAN ONLY WORK ON THE SAME NETWORK AS THE UCM/ETH03, NOT FROM INTERNET Select the IP address on the left (if there are more than 1 UCM/ETH03). The IP address of the UCM/ETH03 is shown on the right pane on top The 2 ports each with their own independent idle time-outs are shown below. This allows 2 different applications to access Comfort, eg iOS and Android apps, ComfortClient However if Comfigurator is connected, it will block the other port so Comfigurator has to be the only application connected to the UCM/Ethernet so that any read/write or firmware upgrading cannot be interrupted. SNTP Setting Check that the local time is correct. Select one of the servers in the NTP Server Pool. These are a list of International NTP servers that provide the local time adjusted for Daylight saving where applicable The NTP Synchronize Interval is the interval for the updating of time to Comfort. 60 minutes is the recommended interval athough you can set a shorter time for testing. If the time difference is less than 4 seconds, the Comfort time is updated but is not recorded in the event log. "Send Time to Comfort" should be checked if the time should be sent to Comfort. Leave it unchecked if you do not want to update Comfort Time. Comfort will correct for any Daylight saving Time adjustments based on the Sunrise/Sunset times settings so it is important to get the setting to the correct location. Email settings SMTP Server: enter the address of a SMTP server Port: 25 or 587 Note that the email authentication by SSL is not supported. Basic authentication by User name and password or No authentication is supported. Hence Gmail and Yahoo email servers are not supported. Note that you can use free stmp servers for the purpose of sending emails which do not require SSL authentication, for example SMTP2go https://www.smtpcorp.com/verification They have a free plan that is limited to 20 emails per day User name: eg techsupport for sending of the email. This field has a maximum length of 24 characters enter the email password for authentication for the STMP server Email From: the name to be displayed in the FROM line of the email Email Subject: what is to be displayed in the SUBJECT line of the email User1 Name to User4 Name: Enter the user names corresponding to the user numbers in Comfort, each of whom have their own user code. These names will be shown in the emails when the alarm is related to a user, eg System disarmed by user or system armed by user. Email addresses: enter up to 4 email addresses to send emails to. Alarms: check the boxes 1 to 4 for the emails to be sent for each Alarm Type triggered. Each Alarm Type can be sent to any combination of 4 emails Note that the email addresses are NOT related to the 4 user names If the email is not received, check the spam folder. Gmail tends to consider automated email senders as spam Last edited on Monday Sep 2nd, 2019 08:07 am by |
|||||||||
ident Administrator
|
Upgrading UCM Firmware, ETH03 Firmware, CS Manager Software The minimum UCM firmware which supports ETH03 is 7.048 If you are upgrading from USB or ETH02 to ETH03 by plugging in the ETH03 Module, please upgrade the UCM firmware to minimum 7.048 before changing to the ETH03 submodule ETH03 with older UCM firmware will not work Note that UCM Firmware is not the same as ETH03 Firmware Upgrading UCM Firmware instructions at http://www.comfortforums.com/forum92/3400.html Upgrading ETH03 firmware instructions at http://www.comfortforums.com/view_topic.php?id=3820&forum_id=113&jump_to=17036#p17036 Upgrading Comfort Server Manager software at http://www.comfortforums.com/view_topic.php?id=3821&forum_id=113&jump_to=17039#p17039 Last edited on Sunday Feb 11th, 2018 09:55 am by |
|||||||||
Daylehouse Member
|
Anyone had any issues with sunrise / sunset times after enabling NTP? My system keeps thinking its night time after sunrise. Works OK for a few days after a program download but then gets out of sync even though Comfort reports the correct time and date. Still investigating. I have disabled the transmit NTP to Comfort to see if the issue occurs again. |
|||||||||
ident Administrator
|
we have not encountered this before The Night time flag is determined every minute, so it should not have any problem I assume you mean the Night time flag that is automatically set by Sunset and cleared by sunrise Perhaps the sunrise /sunset times are corrupted or are not accurate, have you checked them for this date? |
|||||||||
Daylehouse Member
|
The sunrise and sunset times are correct, once the issue occurs I resend the configuration to Comfort and the problem clears up, but after a few days I have lights coming on at the wrong time. I have disabled NTP for now to see if the issue returns. If it does I spend more time looking at Comfort in state to get more detail. |
|||||||||
ident Administrator
|
Can you upgrade to ETH03 2.12 as described in http://www.comfortforums.com/forum113/3904.html It may have something to do with your problem |
|||||||||
Daylehouse Member
|
Thanks, I have upgraded now to 2.12 and rechecked the "send time to Comfort" setting. The system was fine with NTP turned off so I know I don't have some other issue. I will report back how 2.12 and sending NTP time goes over the next week. |
|||||||||
Daylehouse Member
|
OK thats fixed it, looked to be related to the date bug. Thanks! Dayle |
|||||||||
Ghyllwood UCM Pi Users
|
I have just downloaded the iPhone app. I have a UCM UCM/01 with firmware 7.061 The app is working fine but only to set and unset the system. The control page is completely blank on the phone. Is this because I need to change the UCM01 for a UCM/ETH03? or do I need to alter something else? Thanks |
|||||||||
admin Administrator
|
Please go to http://www.comfortforums.com/view_topic.php?id=4250&forum_id=113 to see the reply |